环氧地坪漆因为其优秀的装饰效果,色彩多样,表面光滑平整、光泽亮丽(哑光面除外),特别是环氧自流平地坪表面能达镜面效果,一直深受人们的喜爱。但是有些消费者发现无锡环氧地坪漆施工后表面光泽度不够、黯淡无光,严重影响环氧地坪漆的表面视觉效果。这是什么原因呢?又该如何预防呢?
环氧地坪漆表面暗淡无光的原因:
Reasons for dull surface of epoxy floor paint:
1、因为贪图便宜,选择了环氧地坪漆价格相对较低却质量有问题的材料,导致施工后的环氧地坪达不到预期的效果。
1. Because of the greed for cheapness, epoxy flooring paint has been chosen for materials with relatively low price but poor quality, resulting in the construction of epoxy flooring can not achieve the desired results.
2、环氧地坪漆材料使用时没有按照厂家的要求加入了过量的稀释剂,或者选择的稀释剂不配套,沸点低,挥发过快。
2. When using epoxy floor paint material, there is no excessive diluent added according to the requirements of the manufacturer, or the selected diluent is not matched, boiling point is low and volatilization is too fast.
3、在上一道涂层未完全干透就进行面漆的施工,导致环氧环氧地坪漆黯淡无光。
3. The application of topcoat before the last coat is completely dried leads to a dull epoxy floor paint.
4、基层地面没有使用环氧地坪研磨机打磨平整,地面粗糙,导致环氧地坪漆施工后也不平整,光线折射导致涂膜表面光泽度不够。
4. The base floor is not polished flat by using floor grinder, and the ground is rough, which results in the unevenness of epoxy floor paint after construction. The light refraction results in the insufficient gloss of the coating surface.
5、环氧地坪漆施工时环境温度过高,过高的温度会导致地坪漆起皱,影响表面的光泽度。
5. When epoxy floor paint is constructed, the ambient temperature is too high. Excessive temperature will cause wrinkling of the floor paint and affect the gloss of the surface.
6、环氧地坪漆施工现场环境湿度过大(相对湿度80%以上),导致环氧地坪漆漆膜吸收水分后泛白,失去光泽。
6. The environmental humidity of epoxy floor paint construction site is too high (the relative humidity is over 80%), which causes the epoxy floor paint film to become white after absorbing water and lose luster.
避免环氧地坪漆黯淡无光的方法:
Method to avoid dull epoxy floor paint:
1、选择正规地坪漆厂家生产的有质量保证的材料。
1. Choose materials with quality assurance produced by regular floor paint manufacturers.
2、严格按照地坪漆厂家的要求,添加环氧地坪漆配套的稀释剂。
2. In strict accordance with the requirements of flooring paint manufacturers, add diluents for epoxy flooring paint.
3、面漆施工时一定要等待上一涂层完全干透。
3. When topcoat is applied, it must wait for the top coat to be completely dry.
4、环氧地坪漆施工前一定要用地坪研磨机将地面打磨平整,并将油污、杂物等清理干净。
4. Before the construction of epoxy floor paint, the ground must be ground flat by a floor grinder, and the oil and sundries should be cleaned up.
5、环氧地坪漆最佳施工温度是5-25摄氏度,施工时要避开高温时段;
5. The optimum construction temperature of epoxy floor paint is 5-25 degrees Celsius. It is necessary to avoid high temperature during construction.
6、无锡环氧地坪漆施工时环境湿度不能高于80%。
6. The ambient humidity should not be higher than 80% during the construction of epoxy floor paint.
为什么环氧地坪施工时湿度建议在75%以下盐城环氧地坪 盐城环氧地坪漆施工的注意事项1、现场施工温度≥5℃,若要在 今天盐城环氧地坪施工大家一起发分享环氧地坪漆施工工艺!1、施工前清洗地面,保证地面干净2、按照一定比例将环氧树脂和固化剂搅拌,搅拌均匀后,用刮刀或者滚筒施涂!3、施涂过程中一定要求浸透,加强附着力!5、等待底涂干固后施涂环氧中涂层!6… 阴雨天气环氧地坪需要做的防护措施盐城环氧地坪 我们都知道环氧地坪的施工对天气、温度、湿度有一定的要求。为了保证盐城环氧地坪的施工质量,需要保证良好的施工环境。一旦遇到阴雨天气盐城环氧地坪会采取以下的保护措施。下雨天,气压一般较低,施工时环氧地坪涂料容易留下大量的有害物质,而且这些物质不易挥发。因此,建议打开施工现场的门窗,做好室内通风工…推荐新闻
如何处理环氧地坪施工后的起皮和起皮问题?…
一、环氧地坪漆产品质量因素底漆附着力差,环氧树脂材料质量差,会造成地板耐久性、剥离、分层、变色、开裂等,应使…
在盐城工业环氧地坪在施工前的准备工作是什…
盐城工业环氧地坪在施工前需求查验哪些细活?环氧树脂地坪涂料涂装前当面材品质实行查验,以便左证地面境况设计合理的…
在盐城环氧地坪施工注意事项及其改造修补方…
在我们的生活中,盐城环氧地坪漆是较为常见的一类涂漆了,不管是在各个企业的车间内,还是各个教育机构的教室内,我…
在盐城环氧地坪施工准则以及延长其寿命的方…
在盐城环氧地坪漆是一种很常见的装修材料,现在越来越多人在家里也开始做环氧地坪漆,但是还有很多业主对于环氧地坪…
解析环氧地坪施工中涂附着力差的原因
环氧地坪中涂的作用是增加地坪的厚度,提高地坪的耐磨性能,作为找平层提高地坪的平整性;如果地坪中涂层附着力差,…
在盐城施工高质量的环氧地坪我们需要注意哪…
质量好的盐城环氧地坪一般可以使用5~8年时间,而质量不好的则会在半年之内出现弊病甚至损坏。发生这样问题40%的原因…
哪些因素会引起环氧地坪漆基面含水量过高?…
引起环氧地坪漆基面含水量过高的原因有哪些?目前要求绝大部分建筑的无锡环氧地坪漆系统需要具备防水层(DPM)。防水层…
建筑施工人员合理选择环氧地坪五点须知
环氧地坪是现代建筑行业用的比较多的一种建筑材料。地坪装饰行业最突出的特点是涂料和涂装的整体结合,涂装和涂层体…
环氧地坪多少一平方?盐城环氧地坪施工报价…
环氧树脂地坪系列包括环氧平面涂层,环氧砂浆地坪,环氧自流平地坪,环氧彩砂地坪,环氧防滑地坪,环氧防静电地坪等…
环氧地坪地坪基层处理不好将会有哪些影响?…
熟话说,根基不稳,在强势的产品终究还会下降的。环氧地坪也是如此,盐城环氧地坪有地坪基层,相当于建房子的地基一…
管理员
该内容暂无评论